Search This Blog

Dec 14, 2011

Motion Control Products 100 Series


This motion control system is stand-alone or externally controlled, easy-to-use, plug-and-play and cost effective solution for motion control applications.

Each system includes the power supplies, controller, the servo motor drivers.

This motion control system supports up to 4 axes of motion, 16 TTL / CMOS inputs, 16 TTL / CMOS outputs, 3 analog inputs, and 4 optical encoder inputs. The command port is provided for stand-alone operation.  

The system may be controlled in different ways;
1) Stand-alone
In this mode, the controller does not need an external device such as a PC to operate. The controller is programmed in a simple programming language. The code is developed, downloaded to the controller, run and saved in the controller's non-volatile memory using the supplied Integrated Development Environment (IDE) software.
2) Externally Controlled
In this mode, the external host such as a PC, micro-controller or PLC sends a series of commands to the controller via the RS-232 serial port. The controller processes and performs the incoming commands and responds with proper messages.
3) Control Panel
The supplied user friendly Control Panel software allows the user to set-up the module quickly. The operator is able  to move the mechanism to different positions by pressing the corresponding buttons of the Control Panel or by using the joystick and/or trackball.


The system can also be operated using an analog joystick or a trackball. The speed of the motor is proportional to the tilt angle of the joystick or the rotational speed of the trackball.

Features
  • Plug-and-Play
  • Quick and Easy to Install
  • Very Compact and Easy to Use
  • Low Power Consumption, High Speed Capability
  • Easy Programming Language, No Compiler or Assembler Required
  • Programmable, Teachable or Manual Control
  • Different Modes of Operation:
    • Stand-alone, No PC Required to Operate
    • Host Controlled, PLC, C/C++, Visual Basic, LabVIEW™, MATLAB™
    • Joystick / Trackball Controlled
  • Built-in Self Test
  • Available to Drive DC Servo, Stepper, Three Phase and Voice Coil Motors
  • Totally Integrated Solution
     
Software
  • Easy System Setup and Evaluation 
  • Menu Driven
  • Free Software Included 
 
For more information please visit: 
http://moticont.com/100-series.htm 
Posted by